View UPB1506_59245.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
BIPOLAR DIGITAL INTEGRATED CIRCUITS
PPB1506GV, PPB1507GV
3GHz INPUT DIVIDE BY 256, 128, 64 PRESCALER IC FOR ANALOG DBS TUNERS
The PPB1506GV and PPB1507GV are 3.0 GHz input, high division silicon prescaler ICs for analog DBS tuner applications. These ICs divide-by-256, 128 and 64 contribute to produce analog DBS tuners with kit-use of 17 K series DTS controller or standard CMOS PLL synthesizer IC. The PPB1506GV/PPB1507GV are shrink package versions of the PPB586G/588G or PPB1505GR so that these smaller packages contribute to reduce the mounting space replacing from conventional ICs. The PPB1506GV and PPB1507GV are manufactured using NEC's high fT NESATTMIV silicon bipolar process. This process uses silicon nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and prevent corrosion/migration. Thus, these ICs have excellent performance, uniformity and reliability.
FEATURES
x x x x x
High toggle frequency Low current consumption Selectable high division Pin connection variation
: fin = 0.5 GHz to 3.0 GHz : 5 V, 19 mA : y256, y128, y64 : PPB1506GV and PPB1507GV
High-density surface mounting : 8-pin plastic SSOP (175 mil)
APPLICATION
These ICs can use as a prescaler between local oscillator and PLL frequency synthesizer included modulus prescaler. For example, following application can be chosen;
x x
Analog DBS tuner's synthesizer Analog CATV converter synthesizer
ORDERING INFORMATION
PART NUMBER PACKAGE 8-pin plastic SSOP (175 mil) MARKING 1506 1507 SUPPLYING FORM Embossed tape 8 mm wide. Pin 1 is in tape pull-out direction. 1 000 p/reel.
PPB1506GV-E1 PPB1507GV-E1
Remarks To order evaluation samples, please contact your local NEC sales office. (Part number for sample order: PPB1506GV, PPB1507GV)
Caution: Electro-static sensitive devices
Document No. P10767EJ3V0DS00 (3rd edition) Date Published January 1998 N CP(K) Printed in Japan
(c)
1996
PPB1506GV, PPB1507GV
PIN CONNECTION (Top View)
Pin NO. 1
2 7
1
8
PPB1506GV
SW1 IN IN GND NC SW2 OUT VCC
PPB1507GV
IN VCC SW1 OUT GND SW2 NC IN
2 3
3
6
4 5
4
5
6 7 8
PRODUCT LINE-UP
Features (division, Freq.) y512, y256, 2.5 GHz y128, y64, 2.5 GHz y256, y128, y64 3.0 GHz Part No. ICC (mA) 28 26 14 19 19 fin (GHz) 0.5 to 2.5 0.5 to 2.5 0.5 to 3.0 0.5 to 3.0 0.5 to 3.0 VCC (V) 4.5 to 5.5 4.5 to 5.5 4.5 to 5.5 4.5 to 5.5 4.5 to 5.5 8 pin SSOP 175 mil Standard NEC original Standard Package Pin connection
PPB586G PPB588G PPB1505GR PPB1506GV PPB1507GV
8 pin SOP 225 mil
NEC original
Remarks
x
This table shows the TYP values of main parameters. CHARACTERISTICS.
Please refer to ELECTRICAL
x
PPB586G and PPB588G are discontinued.
INTERNAL BLOCK DIAGRAM
D IN IN CLK
Q
D CLK
Q
D CLK
Q
D CLK
Q
D CLK
Q
CLK Q
Q
Q
Q
Q
D CLK
Q
D CLK
Q
D CLK
Q OUT Q AMP
Q
Q
SW1
SW2
2
PPB1506GV, PPB1507GV
SYSTEM APPLICATION EXAMPLE RF unit block of Analog DBS tuners
1stIF input from DBS converter BPF To 2150 MHz MIX SAW AGC amp. FM demo. Baseband output
OSC To 2650 MHz
High division prescaler PB1506GV or PB1507GV
CMOS PLL synthesizer
LPF loop filter
RF unit block of Analog CATV converter
To 800 MHz BPF upconverter downconverter BPF
To 1300 MHz
OSC To 2000 MHz
High division prescaler PB1506GV or PB1507GV
CMOS PLL synthesizer
LPF loop filter
3
PPB1506GV, PPB1507GV
PIN EXPLANATION
Applied voltage V * * Pin voltage V 2.9 Pin no.
Pin name IN
Functions and explanation Signal input pin. This pin should be coupled to signal source with capacitor (e.g. 1 000 pF) for DC cut. Signal input bypass pin. This pin must be equipped with bypass capacitor (e.g. 1 000 pF) to minimize ground impedance. Ground pin. Ground pattern on the board should be formed as wide as possible to minimize ground impedance. Divide ratio input pin. The ratio can be determined by following applied level to these pins. SW2 H L y128 y256
PPB1506GV
2
PPB1507GV
1
IN
2.9
3
8
GND
0
*
4
5
SW1
H/L
*
1
3
SW2 SW1
H L
y64 y128
6
6
These pins should be equipped with bypass capacitor (e.g. 1 000 pF) to minimize ground impedance. VCC 4.5 to 5.5 * Power supply pin. This pin must be equipped with bypass capacitor (e.g. 10 000 pF) to minimize ground impedance. Divided frequency output pin. This pin is designed as emitter follower output. This pin can be connected to CMOS input due to 1.2 VP-P MIN output. Non connection pin. This pin must be openned. 8 2
OUT
*
2.6 to 4.7
7
4
NC
*
*
5
7
4
PPB1506GV, PPB1507GV
ABSOLUTE MAXIMUM RATINGS
PARAMETER Supply voltage Input voltage Total power dissipation SYMBOL VCC Vin PD TA = +25 qC TA = +25 qC Mounted on double sided copper clad 50 u 50 u 1.6 mm epoxy glass PWB (TA = +85 qC) CONDITION RATINGS 0.5 to +6.0 0.5 to VCC + 0.5 250 UNIT V V mW
Operating ambient temperature Storage temperature
TA Tstg
40 to +85 55 to +150
qC qC
RECOMMENDED OPERATING CONDITIONS
PARAMETER Supply voltage Operating ambient temperature SYMBOL VCC TA MIN. 4.5 40 TYP. 5.0 +25 MAX. 5.5 +85 UNIT V qC NOTICE
ELECTRICAL CHARACTERISTICS (TA = 40 to +85 qC, VCC = 4.5 to 5.5 V, ZS = 50 : )
PARAMETER Circuit current Upper limit operating frequency Lower limit operating frequency 1 Lower limit operating frequency 2 Input power 1 Input power 2 Output Voltage Divide ratio control input high SYMBOL ICC fin(u) fin(L)1 fin(L)2 Pin1 Pin2 Vout VIH1 TEST CONDITION No signals Pin = 15 to +6 dBm Pin = 10 to +6 dBm Pin = 15 to +6 dBm fin = 1.0 to 3.0 GHz fin = 0.5 to 1.0 GHz CL = 8 pF Connection in the test circuit Connection in the test circuit Connection in the test circuit Connection in the test circuit MIN. 12.5 3.0 * * 15 10 1.2 VCC TYP. 19 * * * * * 1.6 VCC MAX. 26.5 * 0.5 1.0 +6 +6 * VCC UNIT mA GHz GHz GHz dBm dBm VP-P
Divide ratio control input low
VIL1
OPEN or GND VCC
OPEN or GND VCC
OPEN or GND VCC
Divide ratio control input high
VIH2
Divide ratio control input low
VIL2
OPEN or GND
OPEN or GND
OPEN or GND
5
PPB1506GV, PPB1507GV
TYPICAL CHARACTERISTICS (Unless otherwise specified TA = +25 qC)
CIRCUIT CURRENT vs. SUPPLY VOLTAGE 25 No signals TA = +85C 20
ICC - Circuit Current - mA
15 TA = +25C 0
TA = -40C
5
0
0
1
2 3 4 VCC - Supply Voltage - V
5
6
Divide by 64 mode
INPUT POWER vs. INPUT FREQUENCY +20 TA = +25C +10
Pin - Input Power - dBm
INPUT POWER vs. INPUT FREQUENCY +20 VCC = 4.5 to 5.5 V TA = -40C 0 -10 -20 -30 -40 -50 TA = +85C TA = +25 C TA = -40C TA = +85C TA = +25C Guaranteed Operating Window
VCC = 4.5 to 5.5 V Guaranteed Operating Window
Pin - Input Power - dBm
+10
0 -10 -20 -30
VCC = 4.5 to 5.5 V -40 -50 -60 100 1000 fin - Input Frequency - MHz 4000
-60 100
1000 fin - Input Frequency - MHz
4000
OUTPUT VOLTAGE vs.INPUT FREQUENCY 2.0 1.9
Vout - Output Voltage - VP-P
OUTPUT VOLTAGE vs.INPUT FREQUENCY 2.0 1.8
Vout - Output Voltage - VP-P
TA = +25C Pin = -10 dBm
TA = -40C Pin = -10 dBm VCC = 5.5 V
1.8 1.7 1.6 1.5 1.4 1.3 1.2 100 1000 fin - Input Frequency - MHz 4000 VCC = 4.5 V VCC = 5.5 V VCC = 5.0 V
1.6 1.4 VCC = 5.0 V 1.2 1.0 0.8 0.6 0.4 100 VCC = 4.5 V
1000 fin - Input Frequency - MHz
4000
6
PPB1506GV, PPB1507GV
OUTPUT VOLTAGE vs. INPUT RFEQUENCY 2.0 1.8
Vout - Output Voltage - VP-P
TA = +85C Pin = -10 dBm VCC = 5.5 V VCC = 5.0 V
1.6 1.4 1.2 1.0 0.8 0.6 0.4 100 VCC = 4.5 V
1000 fin - Input Frequency - MHz
4000
Divide by 128 mode
INPUT POWER vs. INPUT FREQUENCY +20 TA = +25C +10 +10 VCC = 4.5 to 5.5 V Guaranteed Operating Window +20 INPUT POWER vs. INPUT FREQUENCY VCC = 4.5 to 5.5 V TA = -40C 0 -10 -20 -30 -40 -50 1000 fin - Input Frequency - MHz 4000 -60 100 1000 fin - Input Frequency - MHz 4000 TA = +85C TA = +25C TA = -40C TA = +85C TA = +25C Guaranteed Operating Window
Pin - Input Power - dBm
0 -10 -20 -30
VCC = 4.5 to 5.5 V -40 -50 -60 100
OUTPUT VOLTAGE vs. INPUT FREQUENCY 2.0 1.9 TA = +25C Pin = -10 dBm 2.0 1.9
Pin - Input Power - dBm
OUTPUT VOLTAGE vs. INPUT FREQUENCY TA = -40C Pin = -10 dBm
Vout - Output Voltage - VP-P
1.8 1.7 1.6 1.5 1.4 1.3 1.2 100 1000 fin - Input Frequency - MHz 4000 VCC = 4.5 V VCC = 5.5 V VCC = 5.0 V
Vout - Output Voltage - VP-P
1.8 1.7 1.6 1.5 1.4 1.3 1.2 100 1000 fin - Input Frequency - MHz 4000 VCC = 4.5 V VCC = 5.5 V VCC = 5.0 V
7
PPB1506GV, PPB1507GV
OUTPUT VOLTAGE vs. INPUT FREQUENCY 2.0 1.9 TA = +85C Pin = -10 dBm
Vout - Output-Voltage - VP-P
1.8 1.7 1.6 VCC = 5.0 V 1.5 VCC = 4.5 V 1.4 1.3 1.2 100 1000 fin - Input Frequency - MHz 4000
VCC = 5.5 V
Divide by 256 mode
INPUT POWER vs. INPUT FREQUENCY +20 TA = +25C +10
Pin - Input Power - dBm
INPUT POWER vs. INPUT FREQUENCY +20 +10 VCC = 4.5 to 5.5 V TA = -40C TA = +85C TA = +25C
0 -10 -20 -30
VCC = 4.5 to 5.5 V
Guaranteed Operating Window
Pin - Input Power - dBm
0 -10 -20 -30 -40 -50
Guaranteed Operating Window
VCC = 4.5 to 5.5 V -40 -50 -60 100 1000 fin - Input Frequency - MHz 4000
TA = +85C TA = +25C TA = -40 C
-60 100
1000 fin - Input Frequency - MHz
4000
OUTPUT VOLTAGE vs. INPUT FREQUENCY 2.0 1.9
Vout - Output Voltage - VP-P
OUTPUT VOLTAGE vs. INPUT FREQUENCY 2.0 1.9
Vout - Output Voltage - VP-P
TA = +25C Pin = -10 dBm
TA = -40C Pin = -10 dBm
1.8 1.7 1.6 1.5 1.4 1.3 1.2 100 1000 fin - Input Frequency - MHz 4000 VCC = 4.5 V VCC = 5.5 V VCC = 5.0 V
1.8 1.7 1.6 1.5 1.4 1.3 1.2 100 1000 fin - Input Frequency - MHz 4000 VCC = 4.5 V VCC = 5.5 V VCC = 5.0 V
8
PPB1506GV, PPB1507GV
OUTPUT VOLTAGE vs. INPUT FREQUENCY 2.0 1.9
Vout - Output Voltage - VP-P
TA = +85C Pin = -10 dBm
1.8 1.7 1.6 1.5 1.4 1.3 1.2 100 1000 fin - Input Frequency - MHz 4000 VCC = 4.5 V VCC = 5.5 V VCC = 5.0 V
PPB1506GV S11 vs. INPUT FREQUENCY
VCC = 5.0 V
S11 Z REF 1.0 Units 200.0 mUnits/ 3 33.881 -52.875
FREQUENCY MHz 500.0000 600.0000 700.0000 800.0000 900.0000 1000.0000 1100.0000 1200.0000 1300.0000 1400.0000 1500.0000 1600.0000 1700.0000 1800.0000 1900.0000 2000.0000 2100.0000 2200.0000 2300.0000 2400.0000 2500.0000 2600.0000 2700.0000 2800.0000 2900.0000 3000.0000
S11 MAG .868 .828 .794 .761 .721 .706 .662 .629 .595 .554 .516 .440 .428 .543 .555 .560 .558 .564 .570 .574 .574 .564 .530 .476 .411 .331 ANG -26.6 -32.6 -37.4 -41.9 -46.5 -49.3 -54.0 -57.2 -60.2 -62.9 -64.8 -61.9 -51.0 -61.5 -68.4 -74.7 -79.5 -84.9 -90.9 -98.3 -107.9 -118.3 -131.4 -144.6 -159.1 -175.8
hp
C MARKER 3 2.0 GHz D
1 2 4 3 4 3 2
: 500 MHz : 1000 MHz : 2000 MHz : 3000 MHz
1
START STOP
0.500000000 GHz 3.000000000 GHz
9
PPB1506GV, PPB1507GV
PPB1506GV S22 vs. OUTPUT FREQUENCY
Divide by 64 mode, VCC = 5.0 V
S22 Z REF 1.0 Units 200.0 mUnits/ 1 171.22 -04.438
FREQUENCY MHz 45.000 50.000 55.000 60.000 65.000 70.000 75.000 80.000 85.000 90.000 95.000 100.000
S22 MAG .542 .602 .616 .605 .609 .616 .620 .622 .619 .610 .626 .623 ANG -1.4 -.3 0.0 1.1 .7 .3 .1 0.0 .6 .9 -.7 -1.7
hp
C MARKER 1 45.0 MHz D
1 2 1 2
: 45 MHz : 100 MHz
START STOP
0.045000000 GHz 0.100000000 GHz
PPB1506GV S22 vs. OUTPUT FREQUENCY
Divide by 128 mode, VCC = 5.0 V
Z S22 REF 1.0 Units 200.0 mUnits/ 1 192.34 03.109
FREQUENCY MHz 45.000 50.000 55.000 60.000 65.000 70.000 75.000 80.000 85.000 90.000 95.000 100.000
S22 MAG .590 .604 .610 .607 .548 .630 .615 .618 .617 .616 .623 .624 ANG .4 -1.0 -1.1 -.8 -5.9 -0.0 -1.0 -1.4 -1.2 -2.2 -2.4 -2.3
hp
C MARKER 1 45.0 MHz D
1 1 2 2
: 45 MHz : 100 MHz
START STOP
0.045000000 GHz 0.100000000 GHz
10
PPB1506GV, PPB1507GV
PPB1506GV S22 vs. OUTPUT FREQUENCY
Divide by 256 mode, VCC = 5.0 V
Z S22 REF 1.0 Units 200.0 mUnits/ 1 199.25 -05.992
FREQUENCY MHz 45.000 50.000 55.000 60.000 65.000 70.000 75.000 80.000 85.000 90.000 95.000 100.000
S22 MAG .601 .609 .611 .620 .607 .615 .613 .611 .607 .605 .610 .608 ANG -.9 -1.6 -1.5 -1.4 -2.1 -1.9 -3.2 -2.8 -2.5 -2.4 -3.0 -2.8
hp
C MARKER 1 45.0 MHz D
1 1 2
: 45 MHz : 100 MHz
2
START STOP
0.045000000 GHz 0.100000000 GHz
PPB1507GV S11 vs. INPUT FREQUENCY
VCC = 5.0 V
Z S11 REF 1.0 Units 200.0 mUnits/ 4 38.111 0.9707
FREQUENCY MHz 500.0000 600.0000 700.0000 800.0000 900.0000 1000.0000 1100.0000 1200.0000 1300.0000 1400.0000 1500.0000 1600.0000 1700.0000 1800.0000 1900.0000 2000.0000 2100.0000 2200.0000 2300.0000 2400.0000 2500.0000 2600.0000 2700.0000 2800.0000 2900.0000 3000.0000
S11 MAG .857 .849 .800 .764 .725 .665 .619 .573 .531 .484 .439 .377 .340 .377 .441 .464 .443 .466 .465 .454 .433 .383 .350 .332 .271 .185 ANG -27.5 -32.0 -38.9 -43.8 -49.0 -50.9 -55.3 -59.3 -61.3 -62.8 -63.0 -59.1 -54.1 -54.7 -59.5 -67.2 -67.4 -74.5 -81.3 -89.4 -99.2 -109.6 -114.0 -124.2 -141.2 -163.6
hp
C MARKER 4 3.0 GHz D
4 1 2 3 4 1 2
: 500 MHz : 1000 MHz : 2000 MHz : 3000 MHz
3
START STOP
0.500000000 GHz 3.000000000 GHz
11
PPB1506GV, PPB1507GV
PPB1507GV S22 vs. OUTPUT FREQUENCY
Divide by 64 mode, VCC = 5.0 V
Z S22 REF 1.0 Units 200.0 mUnits/ 1 185.13 17.789
FREQUENCY MHz 45.000 50.000 55.000 60.000 65.000 70.000 75.000 80.000 85.000 90.000 95.000 100.000
S22 MAG .580 .572 .574 .574 .584 .587 .592 .587 .589 .591 .573 .604 ANG 3.4 2.5 3.0 2.7 3.0 2.6 2.4 2.6 2.9 2.9 1.7 2.9
hp
C MARKER 1 45.0 MHz D
1 2 1 2
: 45 MHz : 100 MHz
START STOP
0.045000000 GHz 0.100000000 GHz
PPB1507GV S22 vs. OUTPUT FREQUENCY
Divide by 128 mode, VCC = 5.0 V
Z S22 REF 1.0 Units 200.0 mUnits/ 1 185.02 18.953
FREQUENCY MHz 45.000 50.000 55.000 60.000 65.000 70.000 75.000 80.000 85.000 90.000 95.000 100.000
S22 MAG .578 .571 .572 .576 .584 .587 .589 .589 .588 .593 .598 .602 ANG 3.2 2.8 3.3 3.0 3.1 2.8 2.4 2.8 3.0 2.8 3.0 2.9
hp
C MARKER 1 45.0 MHz D
1 2 1 2
: 45 MHz : 100 MHz
START STOP
0.045000000 GHz 0.100000000 GHz
12
PPB1506GV, PPB1507GV
PPB1507GV S22 vs. OUTPUT FREQUENCY
Divide by 256 mode, VCC = 5.0 V
Z S22 REF 1.0 Units 200.0 mUnits/ 1 186.76 17.82
FREQUENCY MHz 45.000 50.000 55.000 60.000 65.000 70.000 75.000 80.000 85.000 90.000 95.000 100.000
S22 MAG .580 .572 .571 .576 .585 .590 .589 .590 .588 .597 .600 .601 ANG 3.0 2.8 2.9 2.9 3.2 2.8 2.5 2.6 2.9 2.9 3.1 3.1
hp
C MARKER 1 45.0 MHz D
1 2 1 2
: 45 MHz : 100 MHz
START STOP
0.045000000 GHz 0.100000000 GHz
13
PPB1506GV, PPB1507GV
TEST CIRCUIT
PPB1506GV
1 SW1 C1 C2 50 S.G C3 3 IN 2 IN
VCC 8 C7 C5 OUT 7 Monitor 1 M 0.6 pF SW2 6 C4 Oscilloscope Stray cap.
4 GND
NC 5
OPEN
or Counter
VCC = +5.0 V 10 %
50
C6
x x
SG (HP-8665A) Counter (HP5350B) : To measure input sensitivity or Oscilloscope : To measure output voltage swing
Divide ratio setting
SW2 H SW1 H L 1/64 1/128 L 1/128 1/256
COMPONENT LIST
PPB1506GV
C1 to C5 C6 Stray cap. C7 1 000 pF 10 000 pF Aprox 4 pF 3.5 pF*
H: Connect to VCC
PPB1507GV
1 000 pF 10 000 pF Aprox 5 pF 2.5 pF*
L: Connect to GND or OPEN
* Capacitance CL = 8 pF for DUT includes C7 value + stray capacitance on the board and measurement equipment.
14
PPB1506GV, PPB1507GV
TEST CIRCUIT
PPB1507GV
C2 50 S.G 2 VCC NC 7 1 IN IN 8
C3
OPEN
3 SW1 C1
SW2 6 C4
4 OUT C5
GND 5
VCC = +5.0 V 10% C6 Monitor 1 M 0.6 pF C7 Stray cap. Oscilloscope or Counter
50
x x
SG (HP-8665A) Counter (HP5350B) : To measure input sensitivity or Oscilloscope : To measure output voltage swing
Divide ratio setting
SW2 H SW1 H L 1/64 1/128 L 1/128 1/256
H: Connect to VCC L: Connect to GND or OPEN
15
PPB1506GV, PPB1507GV
ILLUSTRATION OF THE TEST CIRCUIT ASSEMBLED ON EVALUATION BOARD
PPB1506GV
1P
SW1
VCC
IN IN
C2
C1
C6
OUT
C7
C5
C C 4 3
OUT
SW2
PB1506/08/09GV
OPEN
PPB1507GV
IN
IN
C6
C 2
1P
C 3
C1
VCC SW1
SW2
C 4
OUT OUT
C C 7
5
PB1507GV
EVALUATION BOARD CHARACTERS (1) 35 Pm thick double-sided copper clad 50 u 50 u 0.4 mm polyimide board (2) Back side: GND pattern (3) Solder plated patterns (4) q : Through holes
16
PPB1506GV, PPB1507GV
PACKAGE DIMENSIONS 8 PIN PLASTIC SSOP (UNIT: mm) (175 mil)
8 5
detail of lead end
1
4 4.94 0.2 3.0 MAX. 3.2 0.1
3 -3
+7
0.87 0.2
1.8 MAX.
1.5 0.1
0.65
0.10.1
0.15 -0.05
+0.10
0.5 0.2 0.3 -0.05
+0.10
0.575 MAX. 0.10 M 0.15
17
PPB1506GV, PPB1507GV
NOTE CORRECT USE (1) Observe precautions for handling because of electro-static sensitive devices. (2) Form a ground pattern as wide as possible to minimize ground impedance (to prevent undesired operation). (3) Keep the wiring length of the ground pins as short as possible. (4) Connect a bypass capacitor (e.g. 10 000 pF) to the VCC pin. RECOMMENDED SOLDERING CONDITIONS This product should be soldered in the following recommended conditions. Other soldering methods and conditions than the recommended conditions are to be consulted with our sales representatives.
PPB1506GV, PPB1507GV
Soldering method Infrared ray reflow Soldering conditions Package peak temperature: 235 qC, Hour: within 30 s. (more than 210 qC), Time: 3 times, Limited days: no.* Package peak temperature: 215 qC, Hour: within 40 s. (more than 200 qC), Time: 3 times, Limited days: no.* Soldering tub temperature: less than 260 qC, Hour: within 10 s., Time: 1 time, Limited days: no. Pin area temperature: less than 300 qC, Hour: within 3 s./pin, Limited days: no.* Recommended condition symbol IR35-00-3
VPS
VP15-00-3
Wave soldering
WS60-00-1
Pin part heating
* It is the storage days after opening a dry pack, the storage conditions are 25 qC, less than 65 % RH. Caution The combined use of soldering method is to be avoided (However, except the pin area heating method). For details of recommended soldering conditions for surface mounting, refer to information document SEMICONDUCTOR DEVICE MOUNTING TECHNOLOGY MANUAL (C10535E).
18
PPB1506GV, PPB1507GV
[MEMO]
19
PPB1506GV, PPB1507GV
ATTENTION
OBSERVE PRECAUTIONS FOR HANDLING
ELECTROSTATIC SENSITIVE DEVICES
No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Corporation. NEC Corporation assumes no responsibility for any errors which may appear in this document. NEC Corporation does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from use of a device described herein or any other liability arising from use of such device. No license, either express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Corporation or others. While NEC Corporation has been making continuous effort to enhance the reliability of its semiconductor devices, the possibility of defects cannot be eliminated entirely. To minimize risks of damage or injury to persons or property arising from a defect in an NEC semiconductor device, customers must incorporate sufficient safety measures in its design, such as redundancy, fire-containment, and anti-failure features. NEC devices are classified into the following three quality grades: "Standard", "Special", and "Specific". The Specific quality grade applies only to devices developed based on a customer designated "quality assurance program" for a specific application. The recommended applications of a device depend on its quality grade, as indicated below. Customers must check the quality grade of each device before using it in a particular application. Standard: Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots Special: Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support) Specific: Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC devices is "Standard" unless otherwise specified in NEC's Data Sheets or Data Books. If customers intend to use NEC devices for applications other than those specified for Standard quality grade, they should contact an NEC sales representative in advance. Anti-radioactive design is not implemented in this product.
M4 96. 5

▲Up To Search▲

Price & Availability of UPB1506

	To Download UPB1506 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .